Removal and Replacement
6-39
Removal
1.
Shut down the operating system and power down the system.
2.
Expose the card cage side of the system. See Section 6.3.
3.
Remove the power and signal cables from the repeater on the side of the
StorageWorks shelf.
4.
On early systems the repeater is stuck to the side of the StorageWorks enclosure
with adhesive standoffs, in later systems it is mounted on plastic standoffs to
which it snaps. In either case, pull the repeater free of the enclosure.
Replacement
Reverse the steps in the Removal procedure.
Verification
Power up the system. Use the show device console command to verify that the
StorageWorks shelf is configured into the system.
