Removal and Replacement
6-23
Removal
1.
Shut down the operating system and power down the system.
2.
Expose both the card cage section and the power section of the system. See
Section 6.3 .
3.
Remove the cable clip between the two sections of the system.
4.
Unplug the three cable connections to the motherboard and bend the cable back
over the power section of the system.
5.
Unplug the cable connection to the floppy and, if applicable, to the optional
device above the floppy. Bend the cable back over the power section of the
system.
6.
Unplug the cable connection to the CD-ROM.
7.
Unplug the cable connection to the StorageWorks backplane.
8.
Remove the power harness from the system.
Replacement
Reverse the steps in the Removal procedure.
Verification
Power up the system.
