3-12
Service Manual PRELIMINARY
3.5.2
Testing PCI
The test pci command tests PCI buses and devices. The test runs for 2 minutes.
Example 3–1 Sample Test Command for PCI
P00>>> test pci*
Console is in diagnostic mode
System test, runtime 120 seconds
Type ^C to stop testing
Configuring all PCI buses..
polling ncr0 (NCR 53C810) slot 1, bus 0 PCI, hose 1 SCSI Bus ID 7
dka500.5.0.1.1 DKa500 RRD45 1645
polling ncr1 (NCR 53C810) slot 3, bus 0 PCI, hose 1 SCSI Bus ID 7
dkb200.2.0.3.1 DKb200 RZ29B 0007
dkb400.4.0.3.1 DKb400 RZ29B 0007
polling tulip0 (DECchip 21040-AA) slot 2, bus 0 PCI, hose 1
ewa0.0.0.2.1: 08-00-2B-E5-B4-1A
polling floppy0 (FLOPPY) PCEB - XBUS hose 0
dva0.0.0.1000.0 DVA0 RX23
Testing all PCI buses..
Testing EWA0 network device
Testing VGA (alphanumeric mode only)
Testing SCSI disks (read-only)
Testing floppy (dva0, read-only)
ID Program Device Pass Hard/Soft Bytes Written Bytes Read
-------- ------------ ------------ ------ --------- ------------- ------------
00002c29 exer_kid dkb200.2.0.3 27 0 0 0 14642176
00002c2a exer_kid dkb400.4.0.3 27 0 0 0 14642176
00002c5e exer_kid dva0.0.0.100 0 0 0 0 0
