A-6
Service Manual PRELIMINARY
You can start LFU from either the SRM console or the AlphaBIOS console.
•
From the SRM console, start LFU by issuing the lfu command.
•
From the AlphaBIOS console, select Upgrade AlphaBIOS from the
AlphaBIOS Setup screen (see Figure A-2).
A typical update procedure is:
1.
Start LFU.
2.
Use the LFU list command to show the revisions of modules that LFU can
update and the revisions of update firmware.
3.
Use the LFU update command to write the new firmware.
4.
Use the LFU exit command to exit back to the console.
The sections that follow show examples of updating firmware from the local CD-
ROM, the local floppy, and a network device. Following the examples is an LFU
command reference.
Example 6–2 Booting LFU from the CD-ROM
P00>>> show dev ncr0
polling ncr0 (NCR 53C810) slot 1, bus 0 PCI, hose 1 SCSI Bus ID 7
dka500.5.0.1.1 DKa500 RRD46 1645
P00>>> boot dka500
(boot dka500.5.0.1.1 -flags 0,0)
block 0 of dka500.5.0.1.1 is a valid boot block
.
.
.
jumping to bootstrap code
The default bootfile for this platform is
[AS1200]AS1200_LFU.EXE
Hit <RETURN> at the prompt to use the default bootfile.
