4-36
Service Manual PRELIMINARY
DETECTED PARITY ERROR:This Device Detected
Revision ID x02
Device Class Code x010400 Mass Storage: RAID Controller
Cache Line S x10
Latency T. xFF
Header Type x00 Single Function Device
Bist x00
Base Address Register 1 x00101000
Base Address Register 2 x0412A000
Base Address Register 3 x00000000
Base Address Register 4 x00000000
Base Address Register 5 x00000000
Base Address Register 6 x00000000
Expansion Rom Base Addres x04120000
Interrupt P1 x0C
Interrupt P2 x01
Min Gnt x04
Max Lat x00
CONFIG Address x000000FBC0002000
Slot or Device Number: 4
Device and Vendor ID x00081011 DEC_KZPSA Fast-Wide-Differential
SCSI
Vendor ID: x1011 (Digital Equip Corp)
Device ID: x00000008
Command Register x0107 I/O Space Accesses Response: Enabled
Memory Space Accesses Response: Enabled
PCI Bus Master Capability: Enabled
Monitor for Special Cycle Ops: DISABLED
Generate Mem Wrt/Invalidate Cmds: DISABLED
Parity Error Detection Response: *IGNORE*
Wait Cycle Address/Data Stepping: DISABLED
SERR# Sys Err Driver Capability: Enabled
Fast Back-to-Back to Many Target: DISABLED
Status Register xA2C0 Device is 33 Mhz Capable.
¤
Device Supports User Defineable Features.
Fast Back-to-Back to Different Targets,
Is Supported in Target Device.
Device Select Timing: Medium.
RECEIVED MASTER-ABORT:Master Sets When Its
Transaction Terminated by MasterAbort.
DETECTED PARITY ERROR:This Device Detected
Revision ID x00
Device Class Code x010000 Mass Storage: SCSI Bus Controller
Cache Line S x10
Latency T. xFF
Header Type x00 Single Function Device
Bist x80
Base Address Register 1 x04128000
Base Address Register 2 x00000000
Base Address Register 3 x00100000
Base Address Register 4 x04000000
Base Address Register 5 x00000000
Base Address Register 6 x00000000
Expansion Rom Base Addres x04100000
Interrupt P1 x10
Interrupt P2 x01
Min Gnt x08
Max Lat x7F
