3-8
Service Manual PRELIMINARY
3.5
Testing an Entire System
A test command with no modifiers runs all exercisers for subsystems and devices
on the system. I/O devices tested are supported boot devices. The test runs for
10 minutes.
Example 3–1 Sample Test Command
P00>>> test
Console is in diagnostic mode
System test, runtime 600 seconds
Type ^C to stop testing
Configuring system..
polling ncr0 (NCR 53C810) slot 1, bus 0 PCI, hose 1 SCSI Bus ID 7
dka500.5.0.1.1 DKa500 RRD45 1645
polling ncr1 (NCR 53C810) slot 3, bus 0 PCI, hose 1 SCSI Bus ID 7
dkb200.2.0.3.1 DKb200 RZ29B 0007
dkb400.4.0.3.1 DKb400 RZ29B 0007
polling floppy0 (FLOPPY) PCEB - XBUS hose 0
dva0.0.0.1000.0 DVA0 RX23
polling tulip0 (DECchip 21040-AA) slot 2, bus 0 PCI, hose 1
ewa0.0.0.2.1: 08-00-2B-E5-B4-1A
Testing EWA0 network device
Testing VGA (alphanumeric mode only)
Starting background memory test, affinity to all CPUs..
Starting processor/cache thrasher on each CPU..
Starting processor/cache thrasher on each CPU..
Testing SCSI disks (read-only)
No CD/ROM present, skipping embedded SCSI test
Testing other SCSI devices (read-only)..
Testing floppy drive (dva0, read-only)
