Removal and Replacement
6-21
Removal
1.
Shut down the operating system and power down the system.
2.
Expose the card cage side of the system. See Section 6.3
3.
Unplug the power supply you are replacing.
4.
Remove the four screws at the back of the system cabinet and the two screws at
the back of the power supply that hold the power supply in place.
5.
If you are removing power supply 0, slide the supply out the side of the cabinet.
If you are removing power supply 1, lift the supply out the top of the cabinet.
Replacement
Reverse the steps in the Removal procedure.
Verification
Power up the system.
