Removal and Replacement
6-33
Removal
1.
Shut down the operating system and power down the system.
2.
Expose the card cage side of the system. See Section 6.3.
3.
Remove the two Phillips head screws holding the floppy in the system,
in
Figure 6-15.
4.
Slide the floppy out the front of the system.
Replacement
Reverse the steps in the Removal procedure.
Verification
Power up the system (press the Halt button if necessary to bring up the SRM
console). Use the following SRM console commands to test the CD-ROM:
P00>>> show dev floppy
P00>>> HD buf/dva0
