Removal and Replacement
6-7
Exposing the System
Caution: Be sure the system On/Off button is in the “off” position before removing
system covers.
1.
Shutdown the system operating system.
2.
Press the On/Off button to turn the system off.
3.
Unlock and open the door that exposes the storage shelf.
4.
Pull down the top cover release latch shown in Figure 1-1 until it latches in the
down position.
5.
Grasp the finger groove at the rear of the top cover and pull it straight back
about two inches then lift it off the cabinet.
6.
Pull a side panel back a few inches, tilt the top away from the machine, and lift
it off. (Repeat for the other side)
Buttoning up the System
Reverse the steps in the exposure process.
