manualshive.com logo in svg

Dell OptiPlex 760, Service Manual

The Dell OptiPlex 760 Service Manual is an essential resource for users seeking detailed instructions for maintaining and troubleshooting their computer. Available for free download at manualshive.com, this comprehensive manual offers step-by-step guidance, ensuring optimal performance and longevity of the Dell OptiPlex 760 desktop.

Share
Download
background image

 

b.

 

Connect external audio devices to the sound card's connectors. Do not connect external audio devices to the microphone, speaker/headphone, 

or line-in connectors on the back panel of the computer.  
 

 

  

15.

If you installed a network adapter card and want to turn off the integrated network adapter:  
 

a.

 

Enter system setup, select 

System Configuration

®

 

Integrated NIC

, and change the setting to 

Disabled

. (See 

Entering System Setup

).  

 

b.

 

Connect the network cable to the network adapter card's connectors. Do not connect the network cable to the integrated network connector on 

the back panel of the computer.  
 

 

 

 

 

16.

Install any drivers required for the card as described in the card documentation.  
 

 

 

PS/2 Serial Port Adapter 

 

 

 

 

 

 

Installing a PS/2 Serial Port Adapter  

 

 

1.

Follow the procedures in 

Working on Your Computer

.  

 

 

  

2.

Remove the computer cover (see 

Removing the Computer Cover

).  

 

 

  

3.

Gently lift the release tab on the card retention latch from the inside to pivot the latch open. Pivot the latch until it snaps into the open position.  
 

 

  

4.

Remove the filler bracket (if applicable).  
 

 

 

5.

Align the PS/2 serial-port adapter bracket in the retention slot and press down firmly. Ensure that the adapter is fully seated in the slot.

  

 
 

 

  

6.

Before you close the card retention mechanism, ensure that:  
 

l

 

The tops of all cards and filler brackets are flush with the alignment bar. 

 

l

 

The notch in the top of the card or filler bracket fits around the alignment guide. 

 

 

  

7.

Secure the card(s) by closing the card retention latch and snapping it into place.  
 

 

 

 

CAUTION: 

If you disable the integrated network adapter, you will not have AMT functionality.

 

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

 

CAUTION: 

To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of 

your computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis.

 

NOTE: 

See the documentation that came with the adapter for information on configuring the adapter, making internal connections, or customizing 

it for your computer.

 

CAUTION: 

Do not route card cables over the cards. Cables routed over the cards can prevent the computer cover from closing properly or cause 

damage to the equipment.

Summary of Contents for OptiPlex 760












































































































































































































Reviews:

No comments

Related manuals for OptiPlex 760

Panasonic ToughBook CF-72 Series Supplementary Instructions Manual preview
ToughBook CF-72 Series
Brand: Panasonic Pages: 8
Panasonic Toughbook CF-H2 Operating Instruction preview
Toughbook CF-H2
Brand: Panasonic Pages: 36
Panasonic Toughbook CF-H1CSLFZ6M Reference Manual preview
Toughbook CF-H1CSLFZ6M
Brand: Panasonic Pages: 106
Tandy Color Computer 3 Basic Quick Reference Manual preview
Color Computer 3 Basic
Brand: Tandy Pages: 17
Tandy TRS-80 Model II Service Manual preview
TRS-80 Model II
Brand: Tandy Pages: 36
Tandy 1000 MS-DOS User Manual preview
1000 MS-DOS
Brand: Tandy Pages: 337
Tandy 1000 MS-DOS Programmer'S Reference Manual preview
1000 MS-DOS
Brand: Tandy Pages: 251
IBM 3290 Manual preview
3290
Brand: IBM Pages: 158
IBM 6275 - PC 300 GL Technical Information Manual preview
6275 - PC 300 GL
Brand: IBM Pages: 88
Gigabyte 3D Mercury User Manual preview
3D Mercury
Brand: Gigabyte Pages: 26
ESI S2S Assembly And Operation Instructions Manual preview
S2S
Brand: ESI Pages: 8
Antec ISK 310-150 User Manual preview
ISK 310-150
Brand: Antec Pages: 10
Neousys Technology NRU Series User Manual preview
NRU Series
Brand: Neousys Technology Pages: 73
Sun Microsystems Sun-1 Reference Manual preview
Sun-1
Brand: Sun Microsystems Pages: 92
Arista AP-3500-E01 User Manual preview
AP-3500-E01
Brand: Arista Pages: 47
Vivo DESK-V000W Instruction Manual preview
DESK-V000W
Brand: Vivo Pages: 3
Dell Inspiron 1564 Service Manual preview
Inspiron 1564
Brand: Dell Pages: 57
Dell Inspiron 1764 Service Manual preview
Inspiron 1764
Brand: Dell Pages: 57

Brands by name

Popular brands

Load more brands