manualshive.com logo in svg

Dell OptiPlex 760, Service Manual

The Dell OptiPlex 760 Service Manual is an essential resource for users seeking detailed instructions for maintaining and troubleshooting their computer. Available for free download at manualshive.com, this comprehensive manual offers step-by-step guidance, ensuring optimal performance and longevity of the Dell OptiPlex 760 desktop.

Share
Download
background image

Back to Contents Page

  

 

 System Setup  

Dell™ OptiPlex™ 760 Service Manual 

 

  

Overview 

 

  

Entering System Setup 

 

  

System Setup Options 

 

  

Boot Sequence 

 

  

Booting to a USB Device 

 

  

Password Protection 

 

  

Jumper Settings 

 

  

Clearing Forgotten Passwords 

 

  

Clearing CMOS Settings 

 

  

Deploying Citrix

® 

Provisioning Server (Dell) With Client Static IP Configuration 

 

 

 

Overview  

Use System Setup as follows:  

l

 

To change the system configuration information after you add, change, or remove any hardware in your computer 

 

l

 

To set or change a user-selectable option such as the user password 

 

l

 

To read the current amount of memory or set the type of hard drive installed 

 

Before you use System Setup, it is recommended that you write down the System Setup screen information for future reference. 

 

 

 

Entering System Setup  

 

 

1.

Turn on (or restart) your computer.  
 

 

  

2.

When the DELL™ logo is displayed, you must watch for the F12 prompt to appear. 

 

 

 

  

3.

Once the F12 prompt appears, press <F12> immediately. The 

Boot Menu

 appears.  

 

 

  

4.

Use the up and down arrow keys to select 

System Setup

 and then press <Enter>.  

 

 

 

5.

If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft

®

 Windows

®

 desktop. Then, shut down your 

computer and try again.  
 

 

 

System Setup Screen 

The System Setup screen displays current or changeable configuration information for your computer. Information on the screen is divided into two areas: the 
menu, and the main window. 

 

System Setup Options  

 

CAUTION: 

Unless you are an expert computer user, do not change the settings for this program. Certain changes can make your computer work 

incorrectly. 

 

NOTE: 

The F12 prompt indicates that the keyboard has initialized. This prompt can appear very quickly, so you must watch for it to display, and then 

press <F12>. If you press <F12> before you are prompted, this keystroke will be lost.

Options List 

—

 This field appears on the left side of the 

system setup window. The field is a scrollable list 
containing features that define the configuration of 
your computer, including installed hardware, power 
conservation, and security features. 

Option Field 

—

 This field contains 

information about each option. In 
this field you can view your current 
settings and make changes to your 
settings.  

Use the Tab and Up/Down arrow 
keys on your keyboard to navigate 
or click to navigate using the 
mouse. 

Summary of Contents for OptiPlex 760












































































































































































































Reviews:

No comments

Related manuals for OptiPlex 760

IBM ThinkPad 380 Hardware Maintenance Manual preview
ThinkPad 380
Brand: IBM Pages: 717
Barco TransForm A User Manual preview
TransForm A
Brand: Barco Pages: 202
IBM Power 775 Service Procedure preview
Power 775
Brand: IBM Pages: 27
Data General Service ECLIPSE MV/7800 Product Information Package preview
ECLIPSE MV/7800
Brand: Data General Service Pages: 167
Compaq 6005 - Pro Microtower PC Illustrated Parts & Service Map preview
6005 - Pro Microtower PC
Brand: Compaq Pages: 4
Acer Veriton X680G Service Manual preview
Veriton X680G
Brand: Acer Pages: 84
Casio PB-2000C Service Manual & Parts List preview
PB-2000C
Brand: Casio Pages: 30
AOpen XC Cube edition EZ855 Easy Installation Manual preview
XC Cube edition EZ855
Brand: AOpen Pages: 1
Kingdy HP-5N Series User Manual preview
HP-5N Series
Brand: Kingdy Pages: 29
Partner PT-3000 Technical Specifications preview
PT-3000
Brand: Partner Pages: 5
Monkey Tower Mini 1.1 EN 1298 IM User Manual preview
1.1 EN 1298 IM
Brand: Monkey Tower Mini Pages: 16
AMSTRAD CPC664 Service Manual preview
CPC664
Brand: AMSTRAD Pages: 31
Ergotron WorkFit-S Assembly Instructions Manual preview
WorkFit-S
Brand: Ergotron Pages: 6
Ergotron WorkFit-T User Manual preview
WorkFit-T
Brand: Ergotron Pages: 7
Agilent Technologies R Series User Manual preview
R Series
Brand: Agilent Technologies Pages: 220
Avigilon VMA-BLU-8P8 User Manual preview
VMA-BLU-8P8
Brand: Avigilon Pages: 40
MSI MEG Trident X User Manual - Quick Manual preview
MEG Trident X
Brand: MSI Pages: 34
TRAXION ProGear Topside Tool-Traq Assembly And Usage Instructions preview
ProGear Topside Tool-Traq
Brand: TRAXION Pages: 8

Brands by name

Popular brands

Load more brands