Dell OptiPlex 760 Service Manual Download Page 2 | Manualshive

Page: 2 / 203

background image

Back to Contents Page

Advanced Features

Dell™ OptiPlex™ 760 Service Manual

LegacySelect Technology Control

Manageability

Physical Security

Trusted Platform Module (TPM)

Security Management Software

Computer Tracking Software

About Smart Cards and Fingerprint Readers

Hyperthreading and Multi-Core Technology

Power Management for Windows XP and Windows Vista

LegacySelect Technology Control

LegacySelect technology control offers legacy-full, legacy-reduced, or legacy-free solutions based on common platforms, hard drive images, and help desk

procedures. Control is provided to the administrator through system setup, Dell OpenManage™ IT Assistant, or Dell custom

-factory integration.

LegacySelect allows administrators to electronically activate or deactivate connectors and media devices that include serial and USB connectors, a parallel
connector, a floppy drive, PCI slots, and a PS/2 mouse. Connectors and media devices that are deactivated make resources available. You must restart the
computer to effect the changes.

Manageability

DASH

DASH (Desktop and mobile Architecture for System Hardware) is a Desktop Management Task Force (DMTF) management initiative that standardizes the
manageability interfaces for mobile and desktop hardware. The focus of the DASH architecture is to enable the remote management of desktop and mobile
computing resources in a standard manner that is independent of operating state. Your computer supports early versions of the DASH initiative including the
following management profiles:

l

Base Desktop Mobile

l

Power State Management

l

Boot Control

l

CPU

l

System Memory

l

Fan

l

Power Supply

l

Sensor

l

Physical Asset

l

Software Inventory

Active Management Technology

Intel Active Management Technology (iAMT) provides secure systems management capabilities that reduce IT costs and allow better discovery, healing, and
protection of networked computing assets. With iAMT, computers can be managed regardless of whether the computer is on, off, or the operating system is
hung.

Key benefits of iAMT are:

l

Reduced desk-side visits

l

Automation of more management functionality through enablement of systems management console software

l

Improved security

NOTE:

If you have chosen to use "None" (no manageability) or ASF, you will be unable to take advantage of DASH features and profiles.

NOTE:

iAMT can be configured using Dell Client Manager (DCM) 2.1.1 or later. For complete information on how to configure iAMT, see the Dell Client

Manager 2.1.1 (or later) documentation on

www.dell.com\openmanage

. For more information about Dell's iAMT implementation, see the

Client Systems

Management Administrator's Guide

available on the Dell Support website at

support.dell.com

.

«
1
2
3
4
...
»

Summary of Contents for OptiPlex 760












































































































































































































Reviews:

No comments

Related manuals for OptiPlex 760

Brand: Data General Pages: 132

Brand: Rousseau Pages: 7

AIMB-T1217 Series

Brand: Advantech Pages: 32

6868 - IntelliStation M - Pro

Brand: IBM Pages: 188

Brand: Aaeon Pages: 44

Power Panel 300

Brand: B&R Industries Pages: 612

InBox300 Series

Brand: InHand Pages: 28

Brand: Amiga Pages: 113

Brand: Uplift Desk Pages: 2

Brand: A1Touch Pages: 9

Brand: Dell Pages: 11

Brand: Dell Pages: 41

Brand: Dell Pages: 47

so19-3630CGY - Studio One 19 Charcoal Desktop PC

Brand: Dell Pages: 62

Precision Workstation 340

Brand: Dell Pages: 46

Precision T5500

Brand: Dell Pages: 37

Brand: Dell Pages: 76

Precision WorkStation Vostro 220 System

Brand: Dell Pages: 71

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands