Dell H625cdw User Manual Download Page 339

Page: 339 / 399

Maintaining Your Printer

339

Insert the cleaning rod into the hole of the tab on the drum cartridge until it stops,
and then pull it out.

NOTE:

•

Insert the cleaning rod with the pad side up.

•

It is not necessary to move the cleaning rod back and forth repeatedly.

Return the cleaning rod to its original location.

Reinsert the waste toner box.

Make sure that the two indented parts on the bottom go into the brackets on the
printer.

Summary of Contents for H625cdw
















































































































































































































































































































































































































Search results

Summary of Contents for H625cdw

Reviews:

Related manuals for H625cdw

Brands by name

Popular brands

Dell H625cdw, User Manual

Search results

Summary of Contents for H625cdw

Reviews:

Related manuals for H625cdw

Brands by name

Popular brands