Scanning
|
241
3
Set the mail server information as follows:
NOTE:
•
In this procedure, the server settings for a Gmail account are used as an example. The server
settings differ for each e-mail service.
•
Information about the Gmail account is based on the information as of June 2015. For the
latest information, visit the homepage of Gmail.
a
In the
Primary SMTP Gateway
text box, set the primary SMTP gateway.
For example:
smtp.gmail.com
b
In the
SMTP Port Number
text box, enter the SMTP port number.
This must be 25, 465, 587 or between 5000 and 65535.
For example:
465
c
In the
E-Mail Send Authentication
drop-down list box, specify the authentication
method for outgoing e-mail.
For example:
SMTP AUTH (Login)
d
In the
SMTP Login User
text box, set the SMTP login user.
Up to 63 alphanumeric characters, periods, hyphens, underscores, and at
symbols (@) can be used. If specifying more than one address, separate them
using commas.
For example:
NOTE:
•
It is not recommended to share a personal e-mail account with the Scan to Email function
of the printer. Instead, use an e-mail account dedicated to Scan to Email function.
e
In the
SMTP Login Password
text box, set the SMTP account password.
Up to 31 alphanumeric characters can be used.
f
In the
Re-enter SMTP Login Password
text box, enter the login password again
to check it.
g
Perform either of the following:
Summary of Contents for H625cdw
Page 329: ... 329 6 Maintaining Your Printer ...
Page 353: ... 353 7 Troubleshooting ...
Page 394: ...394 Appendix ...
