Dell H625cdw, User Manual

Page: 166 / 399

166
| Dell™ Printer Configuration Web Tool
*1
The default value can be changed by using Dell Printer Configuration Web Tool.
SNMP Configuration Enable SNMP v1/v2c
Protocol Select the check box to enable the SNMP v1/v2c
protocol.
Edit SNMP v1/v2c
Properties
Click to display the
SNMP v1/v2c
page and to edit the
setting of SNMP v1/v2c protocol from the page.
Enable SNMP v3
Protocol Select the check box to enable the SNMP v3 protocol.
Edit SNMP v3
Properties
Click to display the
SNMP v3
page and to edit the setting
of SNMP v3 protocol from the page.
You can click this item only when SSL/TSL
communication is enabled.
Community Name Community Name
(Read only)
*1
Sets the community name to access (read only) data
using up to 31 alphanumeric characters.
The original setting remains valid if no input is made.
Characters entered for community name in the previous
settings are not displayed on the screen. The default Read
Community is public.
Re-enter Community
Name (Read only)
*1
Enter the community name to access (read only) data
again to check it.
Community Name
(Read/Write)
*1
Sets the community name to access (read and write) data
using up to 31 alphanumeric characters.
The original setting remains valid if no input is made.
Characters entered for community name in the previous
settings are not displayed on the screen. The default
Read/Write Community is private.
Re-enter Community
Name (Read/Write)
*1
Enter the community name to access (read and write)
data again to check it.
Community Name
(Trap)
*1
Sets the community name used for trap up to 31
alphanumeric characters.
The original setting remains valid if no input is made.
Characters entered for Community Name (Trap) in the
previous settings are not displayed on the screen. The
default Trap Community is " " (NULL).
Re-enter Community
Name (Trap)
*1
Enter the community name used for trap again to check
it.
Trap Notification 1-4 Trap Address Type Select the check boxes to notify trap occurrence. In this
case, specify the IP address and IP socket in the following
format:
Trap Address IPv4
Specify the IP address and IP socket in the
nnn.nnn.nnn.nnn:mmmmm format. Each section of nnn
is a variable value between 0 and 255. Note that values
127 and 224-254 are not valid for the first three-digits
only. IP socket
mmmmm is a variable value between 0
and 65,535.
IPv6
Specify the IP address and IP socket in the
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmmmm format.
Each section of XXXX is a hexadecimal variable value
between 0 and ffff. IP socket mmmmm is a variable value
between 0 and 65,535.
Port Number
Notify
Network
*2
Authenticate Error
Trap Select the check box to notify Authenticate Error Trap.