152
|
Dell™ Printer Configuration Web Tool
Incoming
Defaults
Receive Mode
Telephone
Automatic fax reception is turned off. You can
receive a fax by picking up the handset of the
external telephone and then pressing a remote
receive code, or by tapping
Receive
in
On
Hook
and then tapping
Receive
. For details,
see "Receiving a Fax Manually."
Fax
Automatically receives faxes.
Telephone/Fax
When the printer receives an incoming fax, the
external telephone rings for the time specified
in
Auto Receive Tel/Fax
, and then the printer
receives a fax. If an incoming call is not a fax, the
printer beeps from the internal speaker
indicating that the call is a telephone call.
Ans Machine/Fax
The printer can share a telephone line with an
answering machine. In this mode, the printer
monitors the fax signal and pick up the line if
there are fax tones. If the telephone
communication in your country is serial, this
mode is not supported.
DRPD
Before using the Distinctive Ring Pattern
Detection (DRPD) option, a distinctive ring
service must be installed on your telephone line
by the telephone company. After the telephone
company has provided a separate number for
faxing with a distinctive ring pattern, configure
the fax setup to monitor for that specific ring
pattern.
Ring Tone
Volume
Sets the volume of the ring tone, which
indicates that an incoming call is a telephone
call through the internal speaker when
Receive
Mode
is set to
Telephone/Fax
.
Auto Receive Fax
Sets the interval at which the printer goes into
the fax receive mode after answering an
incoming call.
Auto Receive
Tel/Fax
Sets the interval at which the printer goes into
the fax receive mode after the external
telephone receives an incoming call.
Auto Receive
Answer/Fax
Sets the interval at which the printer goes into
the fax receive mode after the external
answering machine receives an incoming call.
Junk Fax Setup
Sets whether to reject unwanted faxes by
accepting only the faxes from the numbers
registered in the phone book.
2 Sided Printing
Sets whether to print on both sides of a sheet of
paper.
Remote Receive
Sets whether to receive a fax by pressing a
remote receive code on the external telephone.
Remote Receive
Tone
Sets a 2-digit remote receive code when
Remote Receive
is
On
.
Discard Size
Sets whether to delete text or images at the
bottom of a fax page when the entire page does
not fit onto the output paper. Selecting
Auto
Reduction
automatically reduces the fax page
to fit it onto the output paper, and does not
discard any images or text at the bottom of the
page.
Summary of Contents for H625cdw
Page 329: ... 329 6 Maintaining Your Printer ...
Page 353: ... 353 7 Troubleshooting ...
Page 394: ...394 Appendix ...