Dell H625cdw User Manual Download Page 196

Page: 196 / 399

196

Loading Print Media

Adjust the paper guides according to the paper size that you want to load.

NOTE:

•

When you load Legal-size paper, extend the tray while pushing the lever located on the front
part of the tray.

Before loading the print media, flex and fan the sheets. Straighten the edges of the
stack on a level surface.

Load the print media into the tray with the recommended print side facing up.

NOTE:

•

Do not exceed the maximum fill line in the tray. Overfilling the tray may cause paper jams.

•

When loading coated paper, load one sheet at a time.

•

When loading letterhead, pre-printed, or pre-punched paper, see "Loading Letterhead,
Pre-Printed, and Pre-Punched Paper."

Summary of Contents for H625cdw
















































































































































































































































































































































































































Search results

Summary of Contents for H625cdw

Reviews:

Related manuals for H625cdw

Brands by name

Popular brands

Dell H625cdw, User Manual

Search results

Summary of Contents for H625cdw

Reviews:

Related manuals for H625cdw

Brands by name

Popular brands