manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 94

Recorder

94

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

Packet speed
These selection buttons will indicate the speed of the selected packet. They are not selectable by the
user, they just function as an indicator.

Fields
For primary packets the 'Fields' page shows all the fields the header of the packet is made of plus the
quadlet data fields if they are present. For Phy packets it displays all the fields the phy packet is made of.
And for unformatted packets, it just shows all the packet quadlets. The 'source ID' and 'destination ID'
fields are displayed in a special format. The bus number and node number are displayed separately, with
a ':' character in between them. If the bus number is 1023, it is substituted by the text 'local'.
Below is an example of the 'Fields' page for some read request packet.

Layout
The same fields displayed in the 'Fields' page are displayed in the 'Layout' page. But now the layout of the
packet is shown. Each line shows 32 bits, or one quadlet. The exact bit position of each field is shown,
including the field name (mostly some abbreviation because of space limitation) and the value. Reserved
fields and fields with fixed values are shown too. They have no field name, but only a value.
Below is an example of the 'Layout' page for the same packet as above.

Errors
If the selected packet has one or more errors, or if errors are detected because the selected 'Show As
Packet' type does not correspond to the real packet type, an error page is added to the 'Fields' and
'Layout' pages. Selecting this page will list all detected errors.
Below, an example of the 'Errors' page is shown. In this example, the packet above is shown as a stream
packet, which of course will result in errors.

If one or more fields or data is missing (like in the case of 'Data-Block size too small' error above) the
'Field' and 'Layout' pages will also reflect the error by displaying the missing parts in red. Likewise, when
there is too much packet data, the parts that are too much are also displayed red in the 'Fields' and
'Layouts' pages.

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands