manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 285

Audio Video / Control protocol (AV/C)

285

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

  

Additionally, the previous and/or next isochronous packet buttons (at the top-right corner) may be
enabled. Using these buttons you can easily find the previous or next isochronous packet of a continuous
isochronous stream. 

Previous isochronous packet same stream
Clicking this button will select the previous isochronous packet of the same isochronous stream. The
button will be disabled as soon as the first packet of the stream is selected, which corresponds to the 'Iso
stream xx start' event. 

Next isochronous packet, same stream
Clicking this button will select the next isochronous packet of the same isochronous stream. The button
will be disabled as soon as the last packet of the stream is selected, which corresponds to the 'Iso stream
xx stop' event. 

15.1.2.4. Transactions and packets pane

The right-most part of the Protocol View shows the sequence of all found protocol packets and
transactions (including those for AV/C). The order of items in this list corresponds to the order of
recording. It is the same order as displayed in the Transaction View or Packets View of the Recorder. An
example follows: 

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands