manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 144

Generator

144

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

Buttons
The slot definitions window contains the following buttons

Insert
This button can be used to insert a new slot definition.

Delete
This button can be used to delete the currently selected slot.

Move up
This button can be used to move the currently selected slot one line up. This means that the priority will
be increased by one.

Move down
This button can be used to move the currently selected slot one line down. This means that the priority will
be decreased by one.

Duplicate
This button can be used to insert a copy of the currently selected slot definition.

Import
This button can be used to import slot definitions from a file. See Mil1394SlotExample.csv in the example
directory for an example of such a file.

Ok
This button can be used to commit all changes made to the slot definitions.

Cancel
This button can be used to close the dialog, clearing all changes made to the slot definitions.

Slot Definition table
The center of the dialog contains a table with all the slot definitions that are defined. Each slot is defined
by the following fields.

Enabled
If this field is checked, this slot definition is actually used when generating the packets. If this field is not
checked, this slot definition is discarded on packet generation.

Name
This can be given a user-defined name for the slot definition. This name will also show up in the sequence
editor on the main window of the generator.

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands