manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 72

Recorder

72

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

checked, otherwise there is no limit and process has to be stopped manually using 'Stop' button.

First recording will start when you press 'Start' button and the rest will be done automatically. Each
recording ends after a trigger, which you can configure using 'Trigger Settings...'.

View
With this menu you can enable and disable the different kind of Recorder views:

·

Time View 

·

Topology View 

·

Packet View 

·

Transaction View 

·

Protocol View 

All the views, except the protocol view, that are checked will be displayed. You can toggle between
checked and un-checked by selecting the corresponding command. For protocol views, you select one of
the supported protocols or select 'none' if you want no protocol view at all. Supported protocols will be
disabled if no license is available for that protocol. See Protocol View and License Manager for more
information.

Windows
From the 'Windows' menu you can open one of the other windows of the Analyzer.

7.1.2.2. Toolbar

The toolbar contains respectively the following indicators and buttons:

Buttons

Trigger
With this button the Recorder can be triggered. It is only enabled if recording is in progress and the
Recorder is not triggered yet.
Start recording
With this button the Recorder can be started. After starting the Recorder, the recording will be in progress
until it is stopped. It is enabled when the recorder memory is empty and the recording is not in progress
yet.

Stop recording
With this button recording can be stopped. It is enabled when the recording is in progress.

Download recorded data from Analyzer
With this button the recorded data can be downloaded to the host to be displayed. It is enabled if
recording is not in progress and the recorder memory is not empty.

Clear Analyzer recorder memory
With this data the recorder memory can be cleared. It will also clear the displayed data if the data of the
Recorder is currently displayed. The button will be enabled if no record is in progress and the recorder

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands