manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 251

Mil1394 Protocol support

251

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

The 'transactions / packets' pane lists the bus resets and Mil1394 packets in a chronological order.

A red cross in front of a Mil1394 packet in the 'transactions / packets' pane indicates the Mil1394 packet
contains one or more errors.

If you click a Mil1394 packet in the 'transactions / packets' pane, it will highlight. The item in the tree of the
'relation tree' pane, to which the highlighted Mil1394 packet corresponds, will also highlight. The remaining
Mil1394 packets, which also correspond to the highlighted item, will be indicated with a gray background
color.

13.2.3.4. Mil1394 Protocol Settings

The Mil1394 Protocol analyzer has to have knowledge of the nodes on the bus, which support the Mil1394
Protocol. The Mil1394 Protocol analyzer has to know the following information of a node, which support
the Mil1394 Protocol: 

·

its name, 

·

the assigned channel number,

·

the transmit offset and length, this specify the time slot the node may transmit asynchronous stream
packets,

·

the receive offset and length, this specify the time slot the node can aspect to receive asynchronous
stream packets, 

·

and the datapump offset and length, this specifies the time slot the node may transmit datapump
packets.

This information of a node is to be provided manually in the 'Protocol Analyzer Settings' dialog or via an
import file. 

Open 'Protocol Analyzer Settings' dialog
Click the toolbar button 'Settings' to open the 'Protocol Analyzer Settings' dialog, see figure below.

The information of the nodes, which support the Mil1394 Protocol, is to be added in the table 'Mil1394
Channels' of the Mil1394 tab page. Click on the Mil1394 tab to show the Mil1394 tab page on top.

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands