manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 260

Mil1394 Protocol support

260

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

The only field that is non-zero is the "Message Payload Length". This field is set to 12 because the script
sets the ID of the packet to the "Decimal Value 1" field. 

13.3.2. Mil1394 Signal Monitor

This script can be used to monitor signal values for Mil1394 messages. It uses a channel number and
messageID to filter the received messages. Up to 20 signals can be watched simultaneously. Each signal
has a configurable location in the message and data type. 

13.3.2.1. How to use it

Control Panel contents 
After loading the file "Mil1394MessageMonitor.fss" and clicking on the Control Panel tab, a Control Panel
will be shown as in the picture below. The Control Panel contains the following controls: 

Channel 
The channel to receive packets on 

MessageID 
The MessageID to extract the signals for 

Node A, Node B and Node C 
Enable (button is down) these buttons to enable receiving packets on the corresponding Analyzer node 

Message Count 
The number of messages received that matched the specified node, channel and messageID. Note that
this counter is only reset when the script is restarted, not when the criteria are changed. 

Last Error Code 
In case one of the send/receive function calles returned a negative value, this value is displayed in this
control. The textual representation of the error codes can be found here: API function error codes

Error Count 

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands