manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 310

Serial Bus Protocol (SBP)

310

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

in the 'transactions and packets' pane list with a gray bar (the selected item, which is also part of the item
will still be highlighted with the usual selection color).
The example below corresponds to the examples in the 'Fields' and 'Layout' descriptions above. Thus the
selected item consists of 8 transactions and the third transaction is selected. 

17.1.2.5. Protocol Settings

When clicking the 'Protocol Settings' button in the toolbar of the Protocol View, the 'Protocol Settings'
dialog will be displayed. This dialog shows information used by the protocol analyzers to find and correctly
analyze the transactions. For each supported protocol, including SBP, there is a tab page with
protocol-specific settings. The dialog will be initialized with all information that can be found automatically.
If this is not enough for a correct analysis (e.g. the correct login was not recorded), you can add this
information manually. An example of the dialog is shown below. 

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands