manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 349

Settings

349

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

20.2.6.4. External Timing

The FireSpy385X is capable of synchronization between multiple analyzers by setting one as a time
master and the others as time slave. Time on the master can be configured either using an internal clock
running in free running mode or using an IRIG timing source (in combination with a DapTechnology IRIG
Demodulator) to synchronize the internal clock. Currently the Recorder is the only module capable of
using the external timing. 

Synchronization Mode
When using External synchronization, one analyzer must be set to Master and other devices must be set
to slave.

External Time Format
The following time formats are supported:

·

Free Running

·

IRIG B 122
B: BCD Time-Of-Year in 1 second steps, Straight Binary Seconds-Of-Day and 27 Control Function bits
1: Sine Wave, amplitude modulated
2: 1kHz
2: BCD Time-Of-Year

Current Time
This field will show the time from the IRIG source when connected correctly. If this field shows "Could not
detect a clock", Recorder will not be able to use external timing.

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands