manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 146

Generator

146

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

10.1.2.4. Settings

The Cycle Settings dialog can be used to change the following settings:

Cycle master when root
If the Analyzer is the root node and this setting is enabled, it will also act as Cycle Master

Force Root at Start
If this setting is enabled, the Analyzer will try to become the root node when the Generator is started

Cycle Time
If the Analyzer is cycle master, this setting determines the cycle time in nano seconds.

10.2. Mil1394 Stream Generator

10.2.1. How to use it

You can open the Generator by clicking on the Generator button in the main window, or select the
Generator from the 'Analyzer' menu at the top of the main window or one of the other open windows.

When you open the Generator, a window like the following will appear. (although empty)

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands