DAP Technology 1394 Operation Manual Download Page 33 | Manualshive

Page: 33 / 458

DAP Technology 1394 Operation Manual Download Page 33

Getting Started

33

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

Controls
The windows for the main functions (

,

,

and

opened by clicking on the corresponding button. The button will be highlighted when the mouse is
positioned above it.

The led in the left-bottom corner will display the current configuration status. It can be:

·

Gray, indicating that the analyzer is not yet completely configured.

·

Green, indicating that the analyzer is configured successfully and ready for operation.

·

Yellow, indicating a FireStealth analyzer that lost sync.

·

Red, indicating that no analyzer was selected or configured successfully. In this mode, you still can
open, save and analyze files.

3.3. Connecting to an IEEE1394 Bus

To analyze an IEEE1394 bus, you can connect one of the analyzer's IEEE1394 ports to any free port of
an existing bus, or you may disconnect an existing IEEE1394 cable between two ports, and insert the
analyzer in-between the two disconnected ports by using another cable.

In both cases you should connect the analyzer to the existing bus such that it can 'see' all nodes at their
full speed. If you connect the analyzer in such a way that some node has one or more connections
between itself and the analyzer that has a speed lower than the maximum speed this node can handle,
then some packet may not be picked up by the analyzer. The analyzer will detect a 'hidden' (or prefix
only) packet instead, which are counted by the

will know the duration of the hidden

«
...
31
32
33
34
35
...
»

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands