manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 239

Mil1394 Protocol support

239

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

The dialog contains a similar representation of signals as the Signals View itself, however, no values
column and the details pane can not be hidden. You can now simply check the checkbox in front of
signals you are interested in and after pressing "OK" these will be added to the active set. Pressing
"Cancel" will close the dialog and keep the active set as it was before the dialog opened. A detailed
description of all the fields in the "Definition" part will be given further down below. Whenever a signal is
checked, its parent items will also be added to the current group in order to maintain the same grouping
as in the selection dialog. Whenever an item is added to the active set, it will no longer be shown the next
time the dialog is opened. This button will be disabled (grayed out) when the Mil1394 Signal Monitor is
active.

Manually add
This button can be used to manuall add a new signal to the active set. After pressing the button, the
following dialog will be shown.

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands