manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 293

Audio Video / Control protocol (AV/C)

293

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

As you can see above, the 'fcp frame' format definition starts with the 'cts', 'ctype', 'subunit type' and
'subunit ID' fields. Then there are some 'if' items for the optional extensions for the 'subunit type' and
'subunit ID' fields. Then the 'opcode' field follows. After this the format depends on the values of the
'ctype' and 'opcode' field. First we used a 'switch' item to select the correct format depending on the 'ctype'
and inside each 'case' item of this switch we used a 'switch' item for the 'opcode' dependancy. 

Note that this could of course also be done the other way around if you like.

The 'case: NOTIFY' has been expanded in the example above. You can see the switch-on opcode and
each case inside it. The 'case: FUNCTION BLOCK' has been expanded too. You can see that for the
remaining fields for this format (opcode=FUNCTION BLOCK and ctype=NOTIFY) a macro has been
used. The macro ('function block') is shown at the bottom of the definitions tree. It has been expanded too,
so that you can see which field are added.
In the 'Result' pane at the right, the result for the 'fcp frame' is shown in a table and layout view. We filled
in a ctype value of 'NOTIFY' and an opcode value of 'FUNCTION BLOCK' to check the correctness of this
part of the definition tree.

input parameters
The following input parameters can be used by the 'fcp frame' format definition:

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands