manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 348

Settings

348

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

20.2.6.3. Connection

Data-Pickup Logic Connection-Settings

As the FireStealth does not have auto detection of the bus speed, the user must supply it by means of
these configuration settings.

Setting the line speed can be done by making a selection in the Speed box between S800, S400, S200
and S100.

Setting the cable polarity of the cable connected to port A of the FireStealth can be done by making a
selection in the PolarityA box between Normal and Inverted.
Setting the cable polarity of the cable connected to port B of the FireStealth can be done by making a
selection in the PolarityB box between Normal and Inverted.
Note that any change in the Data Pickup Logic Connection Settings will result in a resynchronization
attempt of the FireStealth to the IEEE 1394b bus.

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands