manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 26

Installation

26

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

Step 2
From the "Tools" menu open ‘Settings’ and click on item ‘LAN Devices. 

Step 3
See figure below. Click ‘Add Host address...’ and fill in either the IP number or the DNS host address that
is routed to the FireSpy. Make sure the address is valid and click ‘Ok’ when finished.

Step 4
Now press the apply button and close the dialog.

Step 5
Please proceed with the 

Getting Started

 section to open the newly configured device.

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands