manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 393

Hardware

393

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

based on the latest Gen4 concept. Each analyzer card in fact combines three FireSpy analyzers in one
single instrument. 

 

The PCIe's format takes flexibility to a higher level and addresses the industries growing support for this
data interface. This solution enables users to install the FireSpy hardware in any modern PC that has at
least one 4-lane PCIe slot available. This allows for installation of the FireSpy in developers existing PCs
or installing the analyzer in a rugged field service laptop or lunchbox computer. 

The FireSpy3x22bT have three 1394 nodes connected to three synchronized analysis engines. They are
controlled by a dual core ARM processor running at 667MHz. Each node is connected to two 1394 ports.
Two ports of each 1394 node are connected to a LEMO connector. 

The FireSpy3x22bT are equipped with 5 GB internal memory and extensive hardware filtering and trigger
possibilities. The analyzer can be connected into a host computer using its PCIe interface. On the host
you can control the FireSpy using a graphical user interface to analyze and display the bus traffic in a
user-friendly way; or you can use the API to program your own control software.

24.1.4.1. Main Feature Summary

GENERAL

·

IEEE 1394-2008 Beta compliant

·

Supports S100-S800 transfer rates depending on exact model

·

Connects to host using PCIe interface

·

5GByte memory for embedded OS and packet and data storage

·

Firmware field upgradeable to enable future expansions

·

AUX connector for:

o

Trigger input and output functions

o

Recording external events

o

Time synchronization

·

GUI and API for Windows

TM

 Operating Systems

MONITOR

·

Displays bus activity:

o

isochronous packets

o

all types of asynchronous packets

o

all types of PHY packets

o

all types of acknowledge packets

o

several types of Errors

·

Counts packets according to type, speed, ack and error condition

·

Counts number of bus resets

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands