manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 396

Hardware

396

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

24.1.4.3. FireSpy PCI Board

LEMO Connectors
With these connectors the FireSpy can be connected to the IEEE1394 bus to be analyzed. Each
connector may be connected to the bus. The IEEE1394b ports are (from left to right) A0, A2, B0, B2, C0,
C2.
Each connector is transformer coupled.

Auxiliary Connector
The auxiliary port will be discussed in a separate chapter. See 

Auxiliary connector ports

.

24.1.5. FireSpy 4430b, 4430bT, 4830, 4830bT

The FireSpy4x30xx bus analyzer is world’s only four-node IEEE-1394 bus analyzer. Based on the 4th
generation FireSpy analyzer architecture the FireSpy4x30xx is the most advanced 1394 test equipment in
the market. The FireSpy4x30xx in fact combines four FireSpy analyzers in one single instrument. It
comprises a significantly more powerful on-board processor and improved connectivity to the host.
 

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands