manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 220

Filter/Trigger

220

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

In the example above, the jump-condition is only true for CycleStart packets.

·

other Packets ...: If this option is selected, additional check boxes appear where you can
specify some special packet types or some packet errors. If a packet was detected with a
type for which the corresponding checkbox is checked or with an error for which the
corresponding checkbox is checked, the jump-condition is true.

In the example above, the jump-condition is true for packets with an error.

·

Last Wait was Ack ...: This option is used to specify an Acknowledge condition. If the last
Wait was ended because of the detection of an Packet or Event, then the result of the
jump-condition is always false. The three elipses indicate that additional sub-selections are
possible. When selecting this option, the additional sub-selection options appear at the right
top of the Jump Properties box. See example below.

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands