manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 317

Serial Bus Protocol (SBP)

317

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

17.2.2. Set Options

To be able to use the format definitions in this format set for the SBP2 protocol you need to set the correct
'Set options. Below the 'Set options' of the example file are shown.

The 'Set type' should be 'SBP'. The 'Set key' must be set to 0. The 'Set name' must be unique for all SBP2
type files. So you should fill in some other name here.
When the Analyzer application finds two SBP2 format sets with the same 'Set name' then a warning will
be and the second one will be ignored. This is a valid way to overrule an existing format set.

Automatic set recognition
SBP2 command sets can automatically be selected by special values in the CSR ROM. For all SBP2
devices, somewhere in this ROM there must be a device-type value. These device type numbers are
associated with a device type name. If this name equals the part of the format set 'Set name' after the “
SCSI:” text, then this format set will automatically be used for that SBP2 device.

Currently the following device-types and associated strings are defined:

Device type number

Device type name

Supported by Analyzer?

0

Direct-access (SBC)

Yes

1

Sequential-access (SSC)

Yes

2

Printer (SSC)

Yes

3

Processor (SPC2)

Yes

4

Write-once (SBC)

Yes

5

CDROM (MMC2)

Yes

6

Scanner (SCSI2)

No

7

Optical memory (SBC)

Yes

8

Medium changer (SMC)

No

9

Communication (SCSI2)

No

10

ASC IT8 device

No

11

ASC IT8 device

No

12

Storage array controller (SCC2)

No

13

Enclosure services (SES)

No

14

Simplified direct-access (RBC)

Yes

15

Optical card reader/writer (OCRW) No

16

Reserved for bridging expanders

-

17

Object-based storage (OSD)

No

Thus the example command set described above will be used automatically when a device type value of
14 has been found in the CSR ROM.

If you want to implement a command set for a device type not listed above and you want that it will be

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands