DAP Technology 1394, Operation Manual

Page: 83 / 458

Recorder
83 Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019
An optional pane can be switched on to display additional bus and node information. This information will
be derived from recorded CSR register reads. For each node all Configuration-ROM reads will be
collected and the contents of the Configuration ROM will be reconstructed if possible.
7.3.1. How to use it
You can display/remove the Topology View by checking/unchecking the Topology View item in the View
menu of the Recorder. There is also a shortcut key to toggle the state.
Set the cursor position by clicking in the Time View or by selecting a packet, transaction or protocol item
in one of the other Recorder views. When a transaction or protocol item is selected, one of the
corresponding packets will be selected too, and the cursor position is set to the selected packet. The
Topology corresponding to the cursor position will be displayed in the Topology View.
Examples of the Topology View are dispayed below.
Using the 'Select node display options' button (left button on Topology Toolbar) you can display a dialog to
add information to the nodes. In the right example below the 'EUI64' and 'Power class' options are added.