DAP Technology 1394, Operation Manual

Page: 212 / 458

Filter/Trigger
212 Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019
button: Start or restart trigger sequencer
Clicking this button will activate the sequencer (if it wasn't already active) and the sequencer will start
executing the first item in the trigger sequencer program flow. When the filter/trigger settings need to be
uploaded (Apply button enabled), the user will be asked if the settings must be uploaded before
(re)starting the sequencer. The user can choose to upload, cancel the (re)start or ignore it. If ignored, the
sequencer will run with the old settings information previously loaded into the Analyzer.
button: Copy sequence
Copy sequence to the clipboard.
button: Paste sequence
Paste sequence from the clipboard..
button: Stop trigger sequencer
Clicking this button will deactivate the sequencer. The button will be enabled if the sequencer is active.
button: Move item up
With this button the currently selected item can be moved up. If is was a Jump item its jump target will be
unchanged. If you move the Repeat-start item up, the item previously above the Repeat-start item will be
included in the repeat block. If you move a Repeat-end item up, the item previously above the
Repeat-end item (which was included in the repeat block) will be moved out the repeat block. Note that
you can not move Repeat items up passing other Repeat items. For more information about Repeat
items, see below. You can not move items above the firs item (the Start item).
button: Move item down
With this button the currently selected item can be moved down. If is was a Jump item its jump target will
be unchanged. If you move the Repeat-start item down, the item previously below the Repeat-start item
(which was included in the repeat block) will be moved out the repeat block. If you move a Repeat-end
item down, the item previously below the Repeat-end item will be included in the repeat block. Note that
you can not move Repeat items down passing other Repeat items. For more information about Repeat
items, see below. You can not move items below the last item.
button: Move jump target up
When a Jump item is selected, you can move the jump target for this jump one item up. The button will
be disabled if the jump target is already the highest possible target.
button: Move jump target down
When a Jump item is selected, you can move the jump target for this jump one item down. The button will
be disabled if the jump target is already the lowest possible target.
button: Add a Wait item
When clicking this button, a new Wait item will be inserted in the flow below the selected item. Initially the
Wait item looks as follow:
When this Wait item is executed, the sequencer will wait for a packet. Any packet received will end the
execution of it and the sequencer continues with the execution of the next item in the flow.
When the Wait item is selected, you can change its properties in the Wait Properties box. See below for
the description of these properties. When the properties are changed, the text in the Wait item will reflect
the new properties. Here are some examples:
Below the Wait item will be described in more details.