manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 125

Symbol Recorder

125

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

Chapter 9. Symbol Recorder

NOTE: The Symbol Recorder module is only available on FireStealth analyzers with a Symbol Recorder
Module license.

The '

Time View

' enables the user to view the timing of symbols, packets and toning as they occur on the

connection. A time cursor is used to make time measurements and for selecting individual symbols.

The '

Packet View

' displays all packets in a list. Each packet can be viewed in detail, by showing its packet

fields, packet layout or packet errors. Packets can be displayed as any possible packet type, so the user
can find out what kind of packet an erroneous packet may be.

The '

Symbol View

' displays the details of a selected item.

9.1. Main Window

You can open the Symbol Recorder by clicking on the Symbol Recorder button in the main window, or
select the Symbol Recorder from the 'FireSpy' menu at the top of the main window or one of the other
open windows. It is also possible to start the Symbol Recorder stand alone application from the Windows
Start menu. Only the standalone version is capable of controlling multiple analyzers at the same time.

When you open the Recorder, the window below will appear.

The window is filled with different kinds of views for the recorded data. You can switch them on and off.
The Time View is always displayed (if enabled) at the top. The remaining views share the area between
them . You can enable and disable the different kinds of views using the 'View' menu. In the picture
above, the Time View, Symbol View and the Packet View are visible.

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands