manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 397

Hardware

397

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

The FireSpy4x30xx has four 1394 nodes connected to four synchronized analysis engines. They are
controlled by two dual core ARM processors running at 667MHz. Each node is connected to three 1394
ports. All ports of each node are connected to a separate IEEE-1394 connector with screw mount holes
which was chosen over standard 1394 connectors for improved ruggedness.

The FireSpy4x30xx is equipped with 10 GB internal memory and extensive hardware filtering and trigger
possibilities. The analyzer can be connected to a host computer using the USB3 interface. On the host
you can control the FireSpy using a graphical user interface to analyze and display the bus traffic in a
user-friendly way; or you can use the API to program your own control software.

The seamless integration of the SAE AS5643 protocol makes the FireSpy4x30xx the preferred tool for
many Aerospace & Defense development tasks. DapTechnology has taken considerable efforts to fully
support the AS5643 protocol in all major functional areas of the FireSpy4x30xx and continuously updates
the analyzer functionality according to implementation requirements and ongoing standardization efforts.

24.1.5.1. Main Feature Summary

GENERAL

·

IEEE 1394-2008 Beta compliant

·

Supports S100B-S800B transfer rates depending on exact model

·

Connects to host using USB3.0 interface

·

10GByte memory for embedded OS and packet and data storage

·

Firmware field upgradeable to enable future expansions

·

AUX connector for:

o

Trigger input and output functions

o

Recording external events

·

Software runs on Windows

TM

 Operating Systems

MONITOR

·

Displays bus activity:

o

isochronous packets

o

all types of asynchronous packets

o

all types of PHY packets

o

all types of acknowledge packets

o

several types of Errors

·

Counts packets according to type, speed, ack and error condition

·

Counts number of bus resets

RECORDER

·

Time stamping of all packets and status events with 10ns resolution

·

Packets hidden by slower connections are visible as ‘prefix only’ packets

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands