DAP Technology 1394, Operation Manual

Page: 169 / 458

Scriptor
169 Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019
Whenever the debugger receives a negative return value it is appended to the error view. The picture
above shows an example of a negative value (-6) returned by the recvStreamPacket function. In this case
a bus reset was detected before a packet was received.
The error view will always get focus when it received the first error during script execution. Now you can
click on the error and the script editor on the left will highlight the exact line that resulted in a negative
return code.
11.3. Control Panel
The control panel is used to display the output of a script and/or send values to a script. You can, for
instance, send the value of a specific field of all stream packets on some channel number to a control on
the control panel such that you can easily monitor the value of this field. These values can also be added
to a history graph. An example Control Panel is shown in the picture below.
Adding controls
To add a control, use your secondary (right) mouse button on the control panel and choose one of the
above controls. To view the controls' properties you can click with your secondary mouse button on the