manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 451

Hardware

451

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

24.6.4. FireSpy 800

24.6.4.1. FireSpy Front

USB led
This green led will light up when the FireSpy is connected to the USB port of your computer (see 'FireSpy
800 Rear' below) and the computer is switched on. It indicates the availability of USB bus power.

power led
This green led will light up when the power supply is connected to FireSpy (see 'FireSpy 800 Rear' below)
and the FireSpy is switched on. It indicates the availability of power from the power supply.

IEEE1394bilingual connectors (2x)
With these connectors the FireSpy 800 can be connected to the IEEE1394 bus to be analyzed. One or
both connectors may be connected to the bus.
Both connectors are bilingual. This means that they can be connected to a 1394b (beta) port or to a 1394a
(legacy) port, by using the correct cables.

record led
This red led will light when recording is in progress. See Recorder.

record ready led
This green led will light up when the FireSpy Recorder is ready. See Recorder.

active led
This red led will light up when the FireSpy Generator is active. See Generator.

trigger led
This green led will light up when the FireSpy Recorder has been triggered. See Recorder.

manual trigger
Pressing this button will trigger the Recorder when recording is in progress and the Recorder is not yet
triggered.

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands