manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 276

Industrial / Instrumentation Digital Camera protocol (IIDC)

276

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

Previous frame
Clicking this button will select the first packet of the video frame before the selected frame. 

Playback video
Clicking this button will play back the video frames starting at the selected frame. It tries to play the video
back at the recorded rate, but depending on the format and speed the actual playback rate might be
lower. 

Stop playback
Clicking this button will stop the playback of video frames. 

Next frame
Clicking this button will select the first packet of the video frame after the selected frame. 

Last frame
Clicking this button will select the first packet of the last video frame sent by the unit. 
Note: when the video window has been closed by clicking on the close button, it will remain hidden until it
is reopened by selecting a different value for the 'video frame display' combo box in the video-frame tab. 

14.2.4. Transactions and packets pane

The right-most part of the Protocol View shows the sequence of all found protocol packets and
transactions (including those for IIDC). The order of items in this list corresponds to the order of recording.
It is the same order as displayed in the Transaction View or Packets View of the Recorder. An example
follows: 

Note that the colors identify the type of access and are the same as used in the 'relations' pane (see
above). All transactions and packets in this list that are not part of the protocol currently selected in the
'relation' pane are colored gray.
When an item is selected that consists of more than one packet or transaction, the items are highlighted
in the 'transactions and packets' pane list with a gray bar (the selected item, which is also part of the item,
will still be highlighted with the usual selection color). 

14.2.5. IIDC Protocol Settings

When clicking the 'Protocol Settings' button in the toolbar of the Protocol View, the 'Protocol Settings'
dialog will be displayed. This dialog shows information used by the protocol analyzers to find and correctly
analyze the transactions. For each supported protocol, including IIDC, there is a tab page with

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands