manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 286

Audio Video / Control protocol (AV/C)

286

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

Note that the colors identify the type of access and are the same as used in the 'relations' pane (see
above). All transactions and packets in this list that are not part of the protocol currently selected in the
'relation' pane are colored gray.
When an item is selected that consists of more than one packet or transaction, the items are highlighted
in the 'transactions and packets' pane list with a gray bar (the selected item, which is also part of the item
will still be highlighted with the usual selection color).

15.1.2.5. Isochronous source packets pane

This optional pane, displays the isochronous source packet (as defined in IEC61883) corresponding to the
selected isochronous-stream packet(s). According to the definition of the source packets, one isochronous
source packet can consist of data from a part of an isochronous packet, or from one or more complete
isochronous packets. Below is an example of a combination of the 'Transaction/Isochronous-packet data'
(details) pane and 'Isochronous source packets' pane. 

In this example, the data in one isochronous packet corresponds, again, exactly to one source packet (DV

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands