manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 282

Audio Video / Control protocol (AV/C)

282

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

15.1.2.2. Relations Pane

This pane shows all transactions and packets found, grouped into items and displayed in a tree. The items
are not necessarily recorded in the same order as displayed in this tree. However, all items inside the
same item of the tree (at the same level) are listed in the same order as the first corresponding packet of
each item was recorded. To find out the order of corresponding transactions and packets, see the
'transactions and packets' pane or take a look at one of the other views of the Recorder (e.g. the
Transactions View). 
For each found or manually specified Node Specification there will be a root item in the tree (NodeSpec 0
below). For information about NodeSpec's, see 'AV/C-Protocol Settings' below. For each found or
manually specified AV/C Unit, there will be a Unit item inside the corresponding NodeSpec (Unit 0 in
NodeSpec 0 below). 

Inside the Unit items, the following items can displayed: 

·

FCP commands and responses

 

·

Channel allocation and de-allocation

 

·

Bandwidth allocation and de-allocation

 

·

Plug register transactions

 

·

Isochronous stream start/stop events

 

·

Reset events 

The colors used in the list above are the same as the colors used in the Protocol View. 
FCP commands usually consist of a command transaction, followed by a response transaction. Both are
grouped into the 'FCP command' items. See example below. 

A black item indicates that it has no corresponding transactions or packets (e.g. NodeSpec and Unit
above). It is just used for proper grouping of the items in the tree. All colored items however, correspond
to one or more transactions or packets. When selecting such an item, the details of that item are
displayed in the 'details' pane and the corresponding transactions and packets are highlighted in the
'transactions and packets' pane (see below). Note that bus resets like '' are also displayed in black, but
have a corresponding item in the 'transactions and packets' pane. 

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands