manualshive.com logo in svg

DAP Technology 1394, Operation Manual

Share
Download
DAP Technology 1394 Operation Manual Download Page 409

Hardware

409

Copyright © DapTechnology B.V., 2005-2019 - All Rights Reserved., 5/20/2019

·

Sending of user definable packets

24.2.2.2. Specifications

Dimensions:

125 mm x 48 mm x 224 mm

Weight:

760 g

Power Requirements:

12 V, 10 Watt maximum (without providing 1394 bus power)

Compliance:

FCC Class A

Connections:

USB2.0-connector for host-computer
RJ45 Ethernet connector
2 IEEE 1394-connectors (bilingual/Beta)
BNC-connector for external trigger-input

Indicators:

Green LEDs for: USB, Power, Ethernet, Trigger
Red LEDs for: Record, Scriptor Active, Generate
Buzzer

Switches:

Tumble switch for Power On/Off
Push button for manual triggering

Package Content:

FireSpy
Power Adapter (12V, 1250mA)
USB Cable 2.0
1394b Cable (Beta9 – Beta9)
2x 1394b/1394a Cable (Bilingual9 – 6pin)
Trigger Cable

Product warranty:

36 months limited warranty

Part Number:

FS081
FS081AS5643 (w. AS5643 SW protocol package)

Optional Configuration:

FS041b (TSB41BA3)
FS041bT (TSB41BA3 and S200+ transformers)
FS041bT1 (TSB41BA3 and S100-S200 transformers)

SW Add-on modules:

SBP2 protocol software package
IIDC protocol software package
AV/C protocol software package
IP1394 protocol software package
AS5643 protocol software package

FCC Class A Compliance

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.

Modifications not expressly approved by the manufacturer could void the user's authority to operate the
equipment under FCC rules.

Summary of Contents for 1394











































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands