CyberOptics SE500ULTRA, Hardware Manual

Page: 58 / 188

Chapter 2 : Installation
48 SE500
ULTRA
Hardware Manual
Assigning Secure Areas
Each of the following Secure Areas must be assigned to one of the four SE500
ULTRA
groups
(Supervisor, Engineers, Lead Operators, Operators) from within the SE500
ULTRA
applications.
Each group inherits the rights assigned to the group or groups below it. For more information
about how to assign Secure Areas, refer to “
To assign access to groups ” on page 49.
Table 9. Secure Areas
Secure Area Description Application Where
Used
Auto Logon Group members are not required to log on to the
application if their system account or profile includes an
SE500
ULTRA
group membership.
Teach and Solder Paste
Inspection
SE500
ULTRA
Inspection
Control: Pass-through Allows group members to select Pass-through mode
.
Solder Paste Inspection
SE500
ULTRA
Inspection
Control: Reset Status Allows group members to reset the current inspection
values in the status pane and also clear the data
displayed in all open data views. Solder Paste Inspection
Control: Reset Alarms Allows group members to clear any active alarms
resulting from measurement failures. Solder Paste Inspection
SE500
ULTRA
Inspection
Fiducial View: Apply Allows group members to apply changes to the fiducial
illumination using the Fiducial View. Solder Paste Inspection
Fiducial View: Locate Allows group members to identify an inspection area in
which to search for a fiducial. Solder Paste Inspection
File: Save Allows group members to save changes to the panel
(SRFF) file and the Standard Definition Library (DEF)
file. Teach and Solder Paste
Inspection
SE500
ULTRA
Inspection
Security: Secure Assignments Allows group members to change the Secure Area
assignments. Teach and Solder Paste
Inspection
Status Bar: Units Change Allows group members to change the units using the
right-click menu in the status bar. Solder Paste Inspection
Tools: Options Allows access to the Options window from the Tools
menu. The Options window includes Data handling,
Debug, System (events and responses), and Unit of
Measure options. Solder Paste Inspection
Tools: Image Scan Allows group members to scan the entire panel to
create a bitmap image. Solder Paste Inspection
View: Display Options Allows group members to customize the level of detail
shown in a Panel view, Image view, or Fiducial view. Teach and Solder Paste
Inspection
Valid Reference Scan Choice Allows group members to choose whether to perform a
reference scan when a valid reference scan exists. This
option enables both the
Yes and the No buttons in the
Reference Scan dialog box.
Solder Paste Inspection
Invalid Reference Scan Choice Allows group members to choose whether to perform a
reference scan when the reference scan is invalid. This
option enables both the
Yes
and the
No
buttons in the
Reference Scan dialog box.
Solder Paste Inspection
User Configuration Allows group members to access the System
Configuration Editor. Solder Paste Inspection
Sensor Calibration
Configuration Allows group members to modify sensor settings in the
configuration editor. Solder Paste Inspection