CyberOptics SE500ULTRA, Hardware Manual

Page: 14 / 188

Chapter 1 : System Overview
4 SE500
ULTRA
Hardware Manual
SE500
ULTRA
Rear View
System connections such as power, air, and I/O are accessed at the rear of the machine as shown
in Figure 2 and shown below.
Table 2. SE500
ULTRA
System Components
Component Description
AC Circuit Breaker
(Circuit Breaker 1) The main circuit breaker is located on the rear electrical panel; AC
power is connected to the circuit breaker through the rear electrical
panel and turns off all system power when activated.
Note: Do not obstruct the rear circuit breaker
Air Regulator Regulates compressed air for pneumatic control of the conveyor lift
and clamp.
Cooling Fans Draw air out of the system to cool internal electronics
Digital Input/Output
Connector Connection for an external device such as a separate conveyor.
Ethernet Port Connection to local area network (10/100 Mb Fast ethernet network
configurations).
SMEMA Connectors Connection for upstream and downstream equipment for conveyor
control.
USB Port Connection for USB devices such as a barcode reader.