CyberOptics SE500ULTRA, Hardware Manual

Page: 26 / 188

Chapter 1 : System Overview
16 SE500
ULTRA
Hardware Manual
System Requirements
b
There is an option for upgrading the system processor. Contact CyberOptics for more information.
Table 7. System Requirements
Humidity
●
Operating
●
Storage
20–80% RH non-condensing
10-90% RH non-condensing
Temperature
● Operating (Ambient)
● Storage
15°– 35° C (59°–95° F)
-20°– 70° C (-4°–158° F)
Altitude Up to 2000 m (6562 ft.)
Insulation Coordination Pollution degree 2
Installation Category
(overvoltage category) Category III
Power Requirements
(Hard-wired, single phase) 100–130/220–240 V (±10%), 50/60 Hz, 10–15 amps
Permitted Voltage Drops 90 V for 100–130 VAC
200V for 220–240 VAC
Peak Operating Current 15 amps @ 100 V–130 V
10 amps @ 220V–240 V
Compressed Air Requirements 5.6 Kgf/cm
2
to 7.0 Kgf/cm
2
(80 to 100 psi @ 4 cfm)
Volume of Compressed air in System 98 cm
3
Fuses on Internal Branch Circuit
Breakers Five, 6 amp
Two, 10 amp