CyberOptics SE500ULTRA, Hardware Manual

Page: 83 / 188

CyberOptics Corporation 73
Processor Components
Restoring system disk using Acronis
Use this procedure to restore the system disk if the system hard drive is replaced or if the
operating system becomes corrupt. The system drive on SE500
ULTRA
machines is the C drive
and holds the Windows operating system.
The system disk can be restored either from a Secure Zone located on the disk itself, or from a
disk image CD shipped with the system. This section provides instructions for both methods.
●
Use the Acronis™ Boot Disk and Secure Zone:
when the operating system does not work
properly, but the hard drive can be accessed. (In some cases you can still boot from the hard
drive – see “
Starting the Acronis Recovery Program ” below.)
●
Use the Acronis Boot Disk and the SE500
ULTRA
Recovery Disk:
when the hard drive has
been replaced, or the hard drive cannot be accessed.
Starting the Acronis Recovery Program
The system disk can be restored wither from a secure zone located on the disk itself, or from a
disk image CD shipped with the system. This document provides instructions for both
methods.
●
Use the Acronis™ OEM Zone:
when the operating system does not work properly, but the
hard drive can be accessed – see “ To Boot from the Hard Drive ” on page 73
●
Use the Acronis Boot Disk and the SE500
ULTRA
Recovery Disk:
when the hard drive has
been replaced, or the hard drive cannot be accessed – see “ To Boot from the Acronis Boot CD ”
on page 73.
➢
To Boot from the Hard Drive
If the hard drive is still accessible, boot from the OEM Zone on the hard drive. To do this:
1. Start the computer and watch the screen for the Starting Acronis Loader … Acronis Backup
Recovery Manager prompt.
2. Press F11.
3. At the Windows/Acronis screen, select the option for
Acronis True Image (Full Version)
and press Enter.
4. At the password prompt enter
dontPanic
.
➢
To Boot from the Acronis Boot CD
If the computer will not start, boot from the Acronis Boot CD. To do this:
1. Insert the Acronis Boot CD in the computer.
2. Start the computer.
3. At the Acronis Rescue Media Screen, select
Acronis True Image (Full Version).
i
Note: This procedure restores the system to the configuration shipped from the factory.