CyberOptics SE500ULTRA, Hardware Manual

Page: 51 / 188

CyberOptics Corporation 41
Wago PLC Assembly
Wago PLC Assembly
The label circled in red on the WAGO assembly drawing is originally pasted by the
manufacturer.
It tells the user that if one uses this controller to configure I/O modules, one must calculate the
total current consumption, including all I/O signals and the total current must not exceed 6.3 A
(max current of this controller).
In this SPI’s WAGO control system, it has a limited number of I/O modules and the total
current consumption is much lower than the maximum current (6.3 A). After testing, 1.6 A fuse
is the best option.
Figure 27. WAGO PLC Assembly
Warning:
The maximum current of the supply module is 6.3 A. When configuring the system,
it is important not to exceed the maximum/sum current.
T6.3A
250V